AP TP-Link is one of the Access Point that is widely used to build a hotspot in addition to other merek2 such as Linksys, Minitar, 3Com etc..
With a reason to help the reader who may require knowledge in terms of how menyetting AP TP-Link then we write it for you. The process of setting TP-Link AP in these readings will be more inclined towards setting up as an access point to a Hotspot.
The process of setting TP-Link WA601 which has a function as a Access Point Only (Do not Have the function as the outer) is arguably quite easy and simple so that you do not have to bother to make people pay. You can believe us after reading this tutorial.
AP TP-Link in this discussion has Address: 192.168.1.234 so the device used to set its future must have the same IP class.
Here are the steps.
1. Before we get into TP-Link.
2. Sign In My Network Place> Properties> Local Area Network> Properties
Contents Computer LAN IP = IP Address: 192.168.1.2
Musk Subnet: 255.255.255.0
3. OK and Close.
4. Open your Internet browser, fill in Address: 192.168.1.234 (enter)
5. The contents of User: admin
Password: admin
6. After entering the radio (AP TP-Link), there are menus
7. Among others
· Status,
· Basic Settings consist Network and Wireless
· Advanced Settings consist of DHCP and Wireless Settings
· consists of System Maintenance Tool.
8. First you click Network on the basic settings and then fill
Type: Static IP
IP Address: 192.168.1.234 (Bold text you may modify according to your needs)
Subnet: 255.255.255.0
Gateway: 192.168.1.254 (example address is the address of your router or modem)
Then Save.
9. After that you get to the Wireless menu
Change the SSID eg "HotSpotku"
Select Channel 11 or Channel in accordance with the conditions of your area and Mode 11Mpbs
or you can use automatically.
In Access Point = tick Enable SSID Broadcast.
10. Save
11. System Tools> Reboot
12. Wait a while booting.
13. UTP cables come off the computer before
14. Colokin to Internet resources you use Speedy missal or
ISP
15. Try to do Search by Laptop / PDA
Good luck
With a reason to help the reader who may require knowledge in terms of how menyetting AP TP-Link then we write it for you. The process of setting TP-Link AP in these readings will be more inclined towards setting up as an access point to a Hotspot.
The process of setting TP-Link WA601 which has a function as a Access Point Only (Do not Have the function as the outer) is arguably quite easy and simple so that you do not have to bother to make people pay. You can believe us after reading this tutorial.
AP TP-Link in this discussion has Address: 192.168.1.234 so the device used to set its future must have the same IP class.
Here are the steps.
1. Before we get into TP-Link.
2. Sign In My Network Place> Properties> Local Area Network> Properties
Contents Computer LAN IP = IP Address: 192.168.1.2
Musk Subnet: 255.255.255.0
4. Open your Internet browser, fill in Address: 192.168.1.234 (enter)
5. The contents of User: admin
Password: admin
6. After entering the radio (AP TP-Link), there are menus
7. Among others
· Status,
· Basic Settings consist Network and Wireless
· Advanced Settings consist of DHCP and Wireless Settings
· consists of System Maintenance Tool.
8. First you click Network on the basic settings and then fill
Type: Static IP
IP Address: 192.168.1.234 (Bold text you may modify according to your needs)
Subnet: 255.255.255.0
Gateway: 192.168.1.254 (example address is the address of your router or modem)
Then Save.
Change the SSID eg "HotSpotku"
Select Channel 11 or Channel in accordance with the conditions of your area and Mode 11Mpbs
or you can use automatically.
In Access Point = tick Enable SSID Broadcast.
11. System Tools> Reboot
12. Wait a while booting.
13. UTP cables come off the computer before
14. Colokin to Internet resources you use Speedy missal or
ISP
15. Try to do Search by Laptop / PDA
Good luck
0 Komentar untuk "Setting hotspot using AP TP-Link TL-WA601G"